View source for AT&T DSL ATM information for cisco DSL router setup

The following information was taken from a working motorola modem on AT&T home DSL in the Dallas / Fort Worth area.  The items in bold were used to configure a ciso 837 integrated services router successfully to replace the motorola.

 ADSL Line State:        Up
 ADSL Startup Attempts:  6
 '''ADSL Modulation:        DMT''' 
 ADSL Data Path:         Fast
 Datapump Version:       DSP 7.5.2.202, HAL 7.5.2.1<BR>
                       Downstream  Upstream
                        ----------  ----------
 SNR Margin:                  12.00       12.00 dB
 Line Attenuation:            39.00       23.00 dB
 Output Power:                 0.00       11.88 dBm
 Errored Seconds:                 0           0
 Loss of Signal:                  0       11016
 Loss of Frame:                   0           0
 CRC Errors:                  39121          60
 Data Rate:                    4928         768<BR>
 ATM port status    : Up
 Rx data rate (bps) : 4928
 Tx data rate (bps) : 768<BR>
 ATM Virtual Circuits:<BR>
 VCC #  Type  '''VPI   VCI'''   Encapsulation
 -----  ----  ---  -----  --------------------------
  1     PVC    '''0     35'''  PPP over Ethernet (LLC/SNAP encapsulation)<BR>
 ATM Circuit Statistics: VCC-1<BR>
  Rx Frames     :     431645           Tx Frames     :     362900
  Rx Octets     :  340983553           Tx Octets     :  103278984
  Rx Errors     :          0           Tx Errors     :          0
  Rx Discards   :          0           Tx Discards   :       1573