View source for Juniper junos olive reference

initial prompt after olive / junos 8.5R4.3 installation
  root@%
to enter cli
  root@% '''cli'''
then you get a new prompt...
  root>
to enter configuration mode:
  root> '''configure'''
  Entering configuration mode
  [edit]
  root#     <<< ''new pound prompt''
set root user password
  root# '''set system login user joost authentication plain-text-password'''
  New password:
  Retype new password:
  [edit]
  root# '''set system login user joost class super-user'''
  [edit]
set interface ip address
  root# '''set interfaces em0 unit 0 family inet address 192.168.0.200/24'''
  [edit]
commit your changes and test the new interface that should be working now
  root# '''commit and-quit'''
  commit complete
  Exiting configuration mode
  root> '''ping 192.168.0.1'''
  PING 192.168.0.1 (192.168.0.1): 56 data bytes
  64 bytes from 192.168.0.1: icmp_seq=0 ttl=64 time=8.197 ms
  64 bytes from 192.168.0.1: icmp_seq=1 ttl=64 time=1.927 ms
  64 bytes from 192.168.0.1: icmp_seq=2 ttl=64 time=0.648 ms
  64 bytes from 192.168.0.1: icmp_seq=3 ttl=64 time=0.168 ms

to enable ssh service for incoming management connections
  user@host# '''set system services ssh''' 
  [edit]
  root# '''commit and-quit''' 
  commit complete


[[category:juniper]]