AT&T DSL ATM information for cisco DSL router setup
From thelinuxwiki
The following information was taken from a working motorola modem on AT&T home DSL. The items in bold were used to configure a ciso 837 integrated services router successfully to replace the motorola.
ADSL Line State: Up ADSL Startup Attempts: 6 ADSL Modulation: DMT ADSL Data Path: Fast Datapump Version: DSP 7.5.2.202, HAL 7.5.2.1
Downstream Upstream ---------- ---------- SNR Margin: 12.00 12.00 dB Line Attenuation: 39.00 23.00 dB Output Power: 0.00 11.88 dBm Errored Seconds: 0 0 Loss of Signal: 0 11016 Loss of Frame: 0 0 CRC Errors: 39121 60 Data Rate: 4928 768
ATM port status : Up Rx data rate (bps) : 4928 Tx data rate (bps) : 768
ATM Virtual Circuits:
VCC # Type VPI VCI Encapsulation ----- ---- --- ----- -------------------------- 1 PVC 0 35 PPP over Ethernet (LLC/SNAP encapsulation)
ATM Circuit Statistics: VCC-1
Rx Frames : 431645 Tx Frames : 362900 Rx Octets : 340983553 Tx Octets : 103278984 Rx Errors : 0 Tx Errors : 0 Rx Discards : 0 Tx Discards : 1573
